All Packages  Class Hierarchy  This Package  Previous  Next  Index

Class java.io.ObjectInputStream

java.lang.Object
   |
   +----java.io.InputStream
           |
           +----java.io.ObjectInputStream

public class ObjectInputStream
extends InputStream
implements ObjectInput, ObjectStreamConstants
An ObjectInputStream deserializes primitive data and objects previously written using an ObjectOutputStream. ObjectOutputStream and ObjectInputStream can provide an application with persistent storage for graphs of objects when used with a FileOutputStream and FileInputStream respectively. ObjectInputStream is used to recover those objects previously serialized. Other uses include passing objects between hosts using a socket stream or for marshaling and unmarshaling arguments and parameters in a remote communication system.

ObjectInputStream ensures that the types of all objects in the graph created from the stream match the classes present in the Java Virtual Machine. Classes are loaded as required using the standard mechanisms.

Only objects that support the java.io.Serializable or java.io.Externalizable interface can be read from streams. The method readObject is used to read an object from the stream. Java's safe casting should be used to get the desired type. In Java, strings and arrays are objects and are treated as objects during serialization. When read they need to be cast to the expected type.

Primitive data types can be read from the stream using the appropriate method on DataInput.

The default deserialization mechanism for objects restores the contents of each field to the value and type it had when it was written. Fields declared as transient or static are ignored by the deserialization process. References to other objects cause those objects to be read from the stream as necessary. Graphs of objects are restored correctly using a reference sharing mechanism. New objects are always allocated when deserializing, which prevents existing objects from being overwritten.

Reading an object is analogous to running the constructors of a new object. Memory is allocated for the object and initialized to zero (NULL). No-arg constructors are invoked for the non-serializable classes and then the fields of the serializable classes are restored from the stream starting with the serializable class closest to java.lang.object and finishing with the object's most specifiec class.

For example to read from a stream as written by the example in ObjectOutputStream:

	FileInputStream istream = new FileInputStream("t.tmp");
	ObjectInputStream p = new ObjectInputStream(istream);
	int i = p.readInt();
	String today = (String)p.readObject();
	Date date = (Date)p.readObject();
	istream.close();
 
Classes control how they are serialized by implementing either the java.io.Serializable or java.io.Externalizable interfaces.

Implementing the Serializable interface allows object serialization to save and restore the entire state of the object and it allows classes to evolve between the time the stream is written and the time it is read. It automatically traverses references between objects, saving and restoring entire graphs. Serializable classes that require special handling during the serialization and deserialization process should implement both of these methods:

 private void writeObject(java.io.ObjectOutputStream stream)
     throws IOException;
 private void readObject(java.io.ObjectInputStream stream)
     throws IOException, ClassNotFoundException; 
 

The readObject method is responsible for reading and restoring the state of the object for its particular class using data written to the stream by the corresponding writeObject method. The method does not need to concern itself with the state belonging to its superclasses or subclasses. State is restored by reading data from the ObjectInputStream for the individual fields and making assignments to the appropriate fields of the object. Reading primitive data types is supported by DataInput.

Serialization does not read or assign values to the fields of any object that does not implement the java.io.Serializable interface. Subclasses of Objects that are not serializable can be serializable. In this case the non-serializable class must have a no-arg constructor to allow its fields to be initialized. In this case it is the responsibility of the subclass to save and restore the state of the non-serializable class. It is frequently the case that the fields of that class are accessible (public, package, or protected) or that there are get and set methods that can be used to restore the state.

Any exception that occurs while deserializing an object will be caught by the ObjectInputStream and abort the reading process.

Implementing the Externalizable interface allows the object to assume complete control over the contents and format of the object's serialized form. The methods of the Externalizable interface, writeExternal and readExternal, are called to save and restore the objects state. When implemented by a class they can write and read their own state using all of the methods of ObjectOutput and ObjectInput. It is the responsibility of the objects to handle any versioning that occurs.

Since:
JDK1.1
See Also:
DataInput, ObjectOutputStream, Serializable

Constructor Index

 o ObjectInputStream(InputStream)
Create an ObjectInputStream that reads from the specified InputStream.

Method Index

 o available()
Returns the number of bytes that can be read without blocking.
 o close()
Closes the input stream.
 o defaultReadObject()
Read the non-static and non-transient fields of the current class from this stream.
 o enableResolveObject(boolean)
Enable the stream to allow objects read from the stream to be replaced.
 o read()
Reads a byte of data.
 o read(byte[], int, int)
Reads into an array of bytes.
 o readBoolean()
Reads in a boolean.
 o readByte()
Reads an 8 bit byte.
 o readChar()
Reads a 16 bit char.
 o readDouble()
Reads a 64 bit double.
 o readFloat()
Reads a 32 bit float.
 o readFully(byte[])
Reads bytes, blocking until all bytes are read.
 o readFully(byte[], int, int)
Reads bytes, blocking until all bytes are read.
 o readInt()
Reads a 32 bit int.
 o readLine()
Reads in a line that has been terminated by a \n, \r, \r\n or EOF.
 o readLong()
Reads a 64 bit long.
 o readObject()
Read an object from the ObjectInputStream.
 o readShort()
Reads a 16 bit short.
 o readStreamHeader()
The readStreamHeader method is provided to allow subclasses to read and verify their own stream headers.
 o readUnsignedByte()
Reads an unsigned 8 bit byte.
 o readUnsignedShort()
Reads an unsigned 16 bit short.
 o readUTF()
Reads a UTF format String.
 o registerValidation(ObjectInputValidation, int)
Register an object to be validated before the graph is returned.
 o resolveClass(ObjectStreamClass)
Subclasses may implement this method to allow classes to be fetched from an alternate source.
 o resolveObject(Object)
This method will allow trusted subclasses of ObjectInputStream to substitute one object for another during deserialization.
 o skipBytes(int)
Skips bytes, block until all bytes are skipped.

Constructors

 o ObjectInputStream
 public ObjectInputStream(InputStream in) throws IOException, StreamCorruptedException
Create an ObjectInputStream that reads from the specified InputStream. The stream header containing the magic number and version number are read from the stream and verified. This method will block until the corresponding ObjectOutputStream has written and flushed the header.

Throws: StreamCorruptedException
The version or magic number are incorrect.
Throws: IOException
An exception occurred in the underlying stream.

Methods

 o readObject
 public final Object readObject() throws OptionalDataException, ClassNotFoundException, IOException
Read an object from the ObjectInputStream. The class of the object, the signature of the class, and the values of the non-transient and non-static fields of the class and all of its supertypes are read. Default deserializing for a class can be overriden using the writeObject and readObject methods. Objects referenced by this object are read transitively so that a complete equivalent graph of objects is reconstructed by readObject.

The root object is completly restored when all of its fields and the objects it references are completely restored. At this point the object validation callbacks are executed in order based on their registered priorities. The callbacks are registered by objects (in the readObject special methods) as they are individually restored. Exceptions are thrown for problems with the InputStream and for classes that should not be deserialized. All exceptions are fatal to the InputStream and leave it in an indeterminate state; it is up to the caller to ignore or recover the stream state.

Throws: ClassNotFoundException
Class of a serialized object cannot be found.
Throws: InvalidClassException
Something is wrong with a class used by serialization.
Throws: StreamCorruptedException
Control information in the stream is inconsistent.
Throws: OptionalDataException
Primitive data was found in the stream instead of objects.
Throws: IOException
Any of the usual Input/Output related exceptions.
 o defaultReadObject
 public final void defaultReadObject() throws IOException, ClassNotFoundException, NotActiveException
Read the non-static and non-transient fields of the current class from this stream. This may only be called from the readObject method of the class being deserialized. It will throw the NotActiveException if it is called otherwise.

Throws: ClassNotFoundException
if the class of a serialized object could not be found.
Throws: IOException
if an I/O error occurs.
Throws: NotActiveException
if the stream is not currently reading objects.
 o registerValidation
 public synchronized void registerValidation(ObjectInputValidation obj,
                                             int prio) throws NotActiveException, InvalidObjectException
Register an object to be validated before the graph is returned. While similar to resolveObject these validations are called after the entire graph has been reconstituted. Typically, a readObject method will register the object with the stream so that when all of the objects are restored a final set of validations can be performed.

Parameters:
obj - the object to receive the validation callback.
prio - controls the order of callbacks;zero is a good default. Use higher numbers to be called back earlier, lower numbers for later callbacks. Within a priority, callbacks are processed in no particular order.
Throws: NotActiveException
The stream is not currently reading objects so it is invalid to register a callback.
Throws: InvalidObjectException
The validation object is null.
 o resolveClass
 protected Class resolveClass(ObjectStreamClass v) throws IOException, ClassNotFoundException
Subclasses may implement this method to allow classes to be fetched from an alternate source. The corresponding method in ObjectOutputStream is annotateClass. This method will be invoked only once for each unique class in the stream. This method can be implemented by subclasses to use an alternate loading mechanism but must return a Class object. Once returned, the serialVersionUID of the class is compared to the serialVersionUID of the serialized class. If there is a mismatch, the deserialization fails and an exception is raised.

By default the class name is resolved relative to the class that called readObject.

Throws: ClassNotFoundException
If class of a serialized object cannot be found.
 o resolveObject
 protected Object resolveObject(Object obj) throws IOException
This method will allow trusted subclasses of ObjectInputStream to substitute one object for another during deserialization. Replacing objects is disabled until enableResolveObject is called. The enableResolveObject method checks that the stream requesting to resolve object can be trusted. Every reference to serializable objects is passed to resolveObject. To insure that the private state of objects is not unintentionally exposed only trusted streams may use resolveObject.

This method is called after an object has been read but before it is returned from readObject. The default resolveObject method just returns the new object.

When a subclass is replacing objects it must insure that the substituted object is compatible with every field where the reference will be stored. Objects whose type is not a subclass of the type of the field or array element abort the serialization by raising an exception and the object is not be stored.

This method is called only once when each object is first encountered. All subsequent references to the object will be redirected to the new object.

Throws: IOException
Any of the usual Input/Output exceptions.
 o enableResolveObject
 protected final boolean enableResolveObject(boolean enable) throws SecurityException
Enable the stream to allow objects read from the stream to be replaced. If the stream is a trusted class it is allowed to enable replacment. Trusted classes are those classes with a classLoader equals null.

When enabled the resolveObject method is called for every object being deserialized.

Throws: SecurityException
The classloader of this stream object is non-null.
 o readStreamHeader
 protected void readStreamHeader() throws IOException, StreamCorruptedException
The readStreamHeader method is provided to allow subclasses to read and verify their own stream headers. It reads and verifies the magic number and version number.

 o read
 public int read() throws IOException
Reads a byte of data. This method will block if no input is available.

Returns:
the byte read, or -1 if the end of the stream is reached.
Throws: IOException
If an I/O error has occurred.
Overrides:
read in class InputStream
 o read
 public int read(byte data[],
                 int offset,
                 int length) throws IOException
Reads into an array of bytes. This method will block until some input is available.

Parameters:
b - the buffer into which the data is read
off - the start offset of the data
len - the maximum number of bytes read
Returns:
the actual number of bytes read, -1 is returned when the end of the stream is reached.
Throws: IOException
If an I/O error has occurred.
Overrides:
read in class InputStream
 o available
 public int available() throws IOException
Returns the number of bytes that can be read without blocking.

Returns:
the number of available bytes.
Overrides:
available in class InputStream
 o close
 public void close() throws IOException
Closes the input stream. Must be called to release any resources associated with the stream.

Throws: IOException
If an I/O error has occurred.
Overrides:
close in class InputStream
 o readBoolean
 public boolean readBoolean() throws IOException
Reads in a boolean.

Returns:
the boolean read.
Throws: EOFException
If end of file is reached.
Throws: IOException
If other I/O error has occurred.
 o readByte
 public byte readByte() throws IOException
Reads an 8 bit byte.

Returns:
the 8 bit byte read.
Throws: EOFException
If end of file is reached.
Throws: IOException
If other I/O error has occurred.
 o readUnsignedByte
 public int readUnsignedByte() throws IOException
Reads an unsigned 8 bit byte.

Returns:
the 8 bit byte read.
Throws: EOFException
If end of file is reached.
Throws: IOException
If other I/O error has occurred.
 o readShort
 public short readShort() throws IOException
Reads a 16 bit short.

Returns:
the 16 bit short read.
Throws: EOFException
If end of file is reached.
Throws: IOException
If other I/O error has occurred.
 o readUnsignedShort
 public int readUnsignedShort() throws IOException
Reads an unsigned 16 bit short.

Returns:
the 16 bit short read.
Throws: EOFException
If end of file is reached.
Throws: IOException
If other I/O error has occurred.
 o readChar
 public char readChar() throws IOException
Reads a 16 bit char.

Returns:
the 16 bit char read.
Throws: EOFException
If end of file is reached.
Throws: IOException
If other I/O error has occurred.
 o readInt
 public int readInt() throws IOException
Reads a 32 bit int.

Returns:
the 32 bit integer read.
Throws: EOFException
If end of file is reached.
Throws: IOException
If other I/O error has occurred.
 o readLong
 public long readLong() throws IOException
Reads a 64 bit long.

Returns:
the read 64 bit long.
Throws: EOFException
If end of file is reached.
Throws: IOException
If other I/O error has occurred.
 o readFloat
 public float readFloat() throws IOException
Reads a 32 bit float.

Returns:
the 32 bit float read.
Throws: EOFException
If end of file is reached.
Throws: IOException
If other I/O error has occurred.
 o readDouble
 public double readDouble() throws IOException
Reads a 64 bit double.

Returns:
the 64 bit double read.
Throws: EOFException
If end of file is reached.
Throws: IOException
If other I/O error has occurred.
 o readFully
 public void readFully(byte data[]) throws IOException
Reads bytes, blocking until all bytes are read.

Parameters:
b - the buffer into which the data is read
Throws: EOFException
If end of file is reached.
Throws: IOException
If other I/O error has occurred.
 o readFully
 public void readFully(byte data[],
                       int offset,
                       int size) throws IOException
Reads bytes, blocking until all bytes are read.

Parameters:
b - the buffer into which the data is read
off - the start offset of the data
len - the maximum number of bytes to read
Throws: EOFException
If end of file is reached.
Throws: IOException
If other I/O error has occurred.
 o skipBytes
 public int skipBytes(int len) throws IOException
Skips bytes, block until all bytes are skipped.

Parameters:
n - the number of bytes to be skipped
Returns:
the actual number of bytes skipped.
Throws: EOFException
If end of file is reached.
Throws: IOException
If other I/O error has occurred.
 o readLine
 public String readLine() throws IOException
Reads in a line that has been terminated by a \n, \r, \r\n or EOF.

Returns:
a String copy of the line.
 o readUTF
 public String readUTF() throws IOException
Reads a UTF format String.

Returns:
the String.

All Packages  Class Hierarchy  This Package  Previous  Next  Index

Submit a bug or feature